campaign_connector/scripts/ui.sh

#!/bin/bash
# filepath: /mnt/storagessd1tb/ABD Texting Testing/ui_bulk_sender_working.sh
# Working bulk SMS sender with correct send button coordinates and variable substitution

DEVICE_IP="10.0.0.193:5555"
CSV_FILE="contacts_cleaned.csv"
SEND_X=1300
SEND_Y=2900
DELAY_SECONDS=3
LOG_FILE="sms_log_$(date +%Y%m%d_%H%M%S).txt"

# Colors
GREEN='\033[0;32m'
BLUE='\033[0;34m'
YELLOW='\033[1;33m'
RED='\033[0;31m'
CYAN='\033[0;36m'
NC='\033[0m'

echo -e "${GREEN}=== Bulk SMS Sender with Variables ===${NC}"
echo "Using send button at: ($SEND_X, $SEND_Y)"
echo ""

# Initialize log
echo "SMS Send Log - $(date)" > "$LOG_FILE"
echo "================================" >> "$LOG_FILE"

# Function to set/customize message template
set_message_template() {
    echo -e "${CYAN}=== Message Template Setup ===${NC}"
    echo "You can use variables in your message:"
    echo "  {name} - Person's name from CSV"
    echo "  {phone} - Phone number"
    echo "  {date} - Current date"
    echo "  {time} - Current time"
    echo "  {custom1}, {custom2}, etc - Any additional CSV columns"
    echo ""
    echo "Examples:"
    echo "  'Hi {name}, this is a test message!'"
    echo "  'Hello {name}, reminder for {date} at {time}'"
    echo ""
    
    echo "Choose message option:"
    echo "1. Use message from CSV file"
    echo "2. Use same custom message for everyone"
    echo "3. Use custom template with variables"
    read -r choice
    
    case "$choice" in
        1)
            MESSAGE_MODE="csv"
            echo -e "${GREEN}Using messages from CSV file${NC}"
            ;;
        2)
            echo "Enter your message:"
            read -r CUSTOM_MESSAGE
            MESSAGE_MODE="custom"
            echo -e "${GREEN}Using custom message: $CUSTOM_MESSAGE${NC}"
            ;;
        3)
            echo "Enter your message template (use {variable} for substitution):"
            read -r MESSAGE_TEMPLATE
            MESSAGE_MODE="template"
            echo -e "${GREEN}Using template: $MESSAGE_TEMPLATE${NC}"
            ;;
        *)
            MESSAGE_MODE="csv"
            echo "Default: Using CSV messages"
            ;;
    esac
    echo ""
}

# Function to substitute variables in message
substitute_variables() {
    local template="$1"
    local phone="$2"
    local csv_message="$3"
    local name="$4"
    shift 4
    local custom_fields=("$@")
    
    # Start with the template
    local final_message="$template"
    
    # Replace standard variables
    final_message="${final_message//\{phone\}/$phone}"
    final_message="${final_message//\{name\}/$name}"
    final_message="${final_message//\{date\}/$(date +%Y-%m-%d)}"
    final_message="${final_message//\{time\}/$(date +%H:%M)}"
    final_message="${final_message//\{message\}/$csv_message}"
    
    # Replace custom fields (custom1, custom2, etc)
    local i=1
    for field in "${custom_fields[@]}"; do
        final_message="${final_message//\{custom$i\}/$field}"
        ((i++))
    done
    
    echo "$final_message"
}

# Send function with correct coordinates
send_sms() {
    local phone="$1"
    local message="$2"
    local count="$3"
    
    echo -e "${BLUE}[$count] Sending to: $phone${NC}"
    echo "  Message: $message"
    
    # Log to file
    echo "[$(date +%H:%M:%S)] Sending to $phone: $message" >> "$LOG_FILE"
    
    # Clear state
    adb -s "$DEVICE_IP" shell input keyevent KEYCODE_HOME > /dev/null 2>&1
    sleep 1
    
    # Open SMS
    adb -s "$DEVICE_IP" shell "am start \
        -a android.intent.action.SENDTO \
        -d 'sms:$phone' \
        --es sms_body '$message' \
        --activity-clear-top" > /dev/null 2>&1
    
    # Wait for load
    sleep 3
    
    # Tap send button at correct coordinates
    adb -s "$DEVICE_IP" shell input tap $SEND_X $SEND_Y > /dev/null 2>&1
    
    echo -e "${GREEN}  ✓ Sent${NC}"
    echo "  ✓ Sent successfully" >> "$LOG_FILE"
    
    # Return home
    sleep 1
    adb -s "$DEVICE_IP" shell input keyevent KEYCODE_HOME > /dev/null 2>&1
}

# Check CSV file exists and show contents
if [[ ! -f "$CSV_FILE" ]]; then
    echo -e "${RED}ERROR: CSV file not found: $CSV_FILE${NC}"
    exit 1
fi

echo "CSV Contents Preview:"
head -5 "$CSV_FILE" | column -t -s','
echo "..."
echo "Total lines in CSV: $(wc -l < "$CSV_FILE")"
echo ""

# Fix line endings in CSV file
dos2unix "$CSV_FILE" 2>/dev/null || sed -i 's/\r$//' "$CSV_FILE"

# Detect CSV columns and their positions
IFS=',' read -r -a HEADERS < "$CSV_FILE"
echo "Detected CSV columns: ${HEADERS[*]}"

# Find column positions
NAME_COL=-1
PHONE_COL=-1
MESSAGE_COL=-1

for i in "${!HEADERS[@]}"; do
    header=$(echo "${HEADERS[$i]}" | tr -d '"' | tr -d ' ' | tr '[:upper:]' '[:lower:]')
    case "$header" in
        "name"|"firstname"|"contact"|"person")
            NAME_COL=$i
            ;;
        "phone"|"phonenumber"|"number"|"tel"|"telephone"|"mobile"|"cell")
            PHONE_COL=$i
            ;;
        "message"|"msg"|"text"|"content"|"body")
            MESSAGE_COL=$i
            ;;
    esac
done

echo "Column positions - Name: $NAME_COL, Phone: $PHONE_COL, Message: $MESSAGE_COL"

# Validate required columns
if [[ $PHONE_COL -eq -1 ]]; then
    echo -e "${RED}ERROR: No phone column found in CSV. Expected columns: 'phone', 'phonenumber', or 'number'${NC}"
    exit 1
fi

echo ""

# Test device connection
echo "Checking device connection..."
if ! adb devices | grep -q "$DEVICE_IP"; then
    echo -e "${RED}ERROR: Device not connected${NC}"
    exit 1
fi
echo -e "${GREEN}✓ Device connected${NC}"
echo ""

# Set up message template
set_message_template

# Confirm before starting
echo -e "${YELLOW}Ready to send messages to all numbers in CSV?${NC}"
echo "Press Enter to continue or Ctrl+C to cancel..."
read -r

echo ""
echo -e "${YELLOW}Starting bulk SMS send...${NC}"
echo ""

# Process CSV
count=0
skipped=0
sent=0

# Read CSV into array
mapfile -t lines < "$CSV_FILE"

echo "Total lines read: ${#lines[@]}"
echo ""

# Process each line
for i in "${!lines[@]}"; do
    # Skip header
    if [[ $i -eq 0 ]]; then
        continue
    fi
    
    line="${lines[$i]}"
    
    # Parse CSV line into array
    IFS=',' read -r -a fields <<< "$line"
    
    # Extract fields by column position
    phone=""
    csv_message=""
    name=""
    
    # Get phone (required)
    if [[ $PHONE_COL -ge 0 && $PHONE_COL -lt ${#fields[@]} ]]; then
        phone="${fields[$PHONE_COL]}"
    fi
    
    # Get message (optional)
    if [[ $MESSAGE_COL -ge 0 && $MESSAGE_COL -lt ${#fields[@]} ]]; then
        csv_message="${fields[$MESSAGE_COL]}"
    fi
    
    # Get name (optional)
    if [[ $NAME_COL -ge 0 && $NAME_COL -lt ${#fields[@]} ]]; then
        name="${fields[$NAME_COL]}"
    fi
    
    # Get any additional custom fields (skip the main columns we already extracted)
    custom_fields=()
    for ((j=0; j<${#fields[@]}; j++)); do
        if [[ $j -ne $PHONE_COL && $j -ne $MESSAGE_COL && $j -ne $NAME_COL ]]; then
            custom_fields+=("${fields[$j]}")
        fi
    done
    
    # Debug output
    echo "DEBUG: Processing line $i - phone='$phone', csv_message='$csv_message', name='$name'"
    
    # Skip empty lines
    if [[ -z "$phone" ]]; then
        echo "  Skipping empty line"
        ((skipped++))
        continue
    fi
    
    # Clean inputs
    phone=$(echo "$phone" | tr -d '"' | tr -d ' ' | tr -d '\r' | sed 's/[^0-9+]//g')
    csv_message=$(echo "$csv_message" | tr -d '"' | tr -d '\r' | sed 's/^[[:space:]]*//;s/[[:space:]]*$//')
    name=$(echo "$name" | tr -d '"' | tr -d '\r' | sed 's/^[[:space:]]*//;s/[[:space:]]*$//')
    
    # Verify phone number
    if [[ -z "$phone" ]]; then
        echo "  Skipping - phone empty after cleaning"
        ((skipped++))
        continue
    fi
    
    ((count++))
    
    # Determine final message based on mode
    case "$MESSAGE_MODE" in
        "csv")
            final_message="$csv_message"
            ;;
        "custom")
            final_message="$CUSTOM_MESSAGE"
            ;;
        "template")
            final_message=$(substitute_variables "$MESSAGE_TEMPLATE" "$phone" "$csv_message" "$name" "${custom_fields[@]}")
            ;;
        *)
            final_message="$csv_message"
            ;;
    esac
    
    # Send the SMS
    send_sms "$phone" "$final_message" "$count"
    ((sent++))
    
    # Delay between messages
    if [[ $count -lt $((${#lines[@]} - 1)) ]]; then
        echo "  Waiting ${DELAY_SECONDS} seconds before next message..."
        sleep $DELAY_SECONDS
    fi
    
    echo ""
done

# Summary
echo -e "${GREEN}=== Summary ===${NC}"
echo "Lines processed: $((count + skipped))"
echo "Messages sent: $sent"
echo "Skipped: $skipped"
echo ""

# Log summary
echo "" >> "$LOG_FILE"
echo "================================" >> "$LOG_FILE"
echo "Summary:" >> "$LOG_FILE"
echo "Total sent: $sent" >> "$LOG_FILE"
echo "Completed: $(date)" >> "$LOG_FILE"

echo "Log saved to: $LOG_FILE"
echo ""

# Show what was actually sent
echo -e "${YELLOW}Messages sent:${NC}"
grep "Sending to" "$LOG_FILE" | grep -v "Summary"

echo ""
echo -e "${GREEN}✓ Complete! All messages have been sent.${NC}"
echo "Check your Messages app to verify all messages appear in sent folder."